Floor Tiles Archives - Birmingham Tile Doctor

Efflorescence Stained Quarry Tiled Floor After Renovation Great Barr

Efflorescence Stained Quarry Tiled Floor Renovated in Great Barr

A client from Great Barr in North Birmingham discovered a leak in a water pipe, which had been running in to the Quarry tiled living room for some time. The leak was repaired but had resulted in a lot of water soaking into the quarry tiles. This led to a significant amount of efflorescence appearing as the floor dried out leaving them in a poor condition.

Efflorescence Stained Quarry Tiled Floor Before Cleaning Great Barr

I paid a visit to the property to see the condition of the tiles for myself and conducted a few tests to work out the best method to remove the efflorescence and restore the appearance of the quarry tiles. From this I worked out a quote which was submitted to my client’s insurance company.

The job was then put on hold for a couple of months until the client’s insurance company agreed the claim. This as it turns out was not such a bad thing, as the floor needed time to dry out completely (aided with dehumidifiers) before work began.

Cleaning a Quarry Tiled Living Room Floor

On the first day I started by taking moisture readings from the floor, which were quite low, and confirmed the floor had indeed dried out. Next, I gave the floor a general clean using Tile Doctor Remove & Go, I used a strong dilution and sprayed it onto the floor allowing it to soak in for ten minutes. Then I went around the edges and corners with a piece of black scrubbing pad to get the awkward areas clean first. I then used a 120-grit carbide silicone pad fitted to a rotary machine to loosen up the dirt.

The floor was then rinsed with an air flex pro machine which applies water at high pressure to the floor and then simultaneously extracts the dislodged dirt with a built-in wet vacuum.

To deal with the efflorescence I applied Tile Doctor Grout Clean-up and worked it in with a 240-grit carbide pad as before. This product is acidic and is perfect for dissolving the alkaline salts that form efflorescence. The solution was then rinsed off and extracted as before, and I set up a couple of air movers to aid drying the floor, for a couple of hours.

Sealing a Quarry Tiled Living Room Floor

Before leaving for the day I applied a coat of Tile Doctor Stone Oil and let that soak in for twenty minutes before towelling off the excess, the floor was then let to dry off fully overnight, again I left a couple of air movers in place to assist with the drying.

The next day I applied two coats of Tile Doctor X-Tra Seal, leaving an hour between coats to dry. The Stone Oil and X-Tra Seal will give great protection going forward and give the quarry tiles a slight sheen which really lifts the appearance of the tiles. Another benefit of the sealer is it improves the colour of the tiles and being fully breathable it will allow moisture still in the floor to rise through and evaporate at the surface.

Finally, I buffed the Quarry tiles with a white pad to bring up their appearance even further. My client was very happy with what was a complete transformation to the floor and left the following review.

Very helpful insurance repair. Visited whenever necessary to give advice and helped with ongoing maintenance suggestions. Before leaving took time to discuss aftercare cleaning for which I left them with a complimentary bottle of Tile Doctor pH Neutral Tile Cleaner.

Efflorescence Stained Quarry Tiled Floor After Renovation Great Barr

Professional Restoration of a Quarry Tiled Living Room in Birmingham

Efflorescence Stained Quarry Tiled Floor Renovated in Great Barr Read More »

Multi-Coloured Kitchen Slate Floor Renovation Wolverhampton

Dull and Lifeless Multi-Coloured Slate Floor Renovated in Wolverhampton

A client in Wolverhampton contacted me about the Multi-Coloured Slate floor in their Kitchen. They had a lot of building work done recently and so dirt had built up on the tiles making them appear dull and lifeless.

Multi-Coloured Kitchen Slate Floor Before Cleaning Wolverhampton

Happy to help I paid a visit to the property to survey the Slate floor and carry out some cleaning tests to work out which method and products would yield the best approach. The results from the testing came up well and they were happy with the quote I worked out, so we booked the work in.

Deep Cleaning a Multi Coloured Slate Tiled Kitchen Floor

This was a straightforward job, the type of job Tile Doctors tackles every week, i.e., cleaning the floor tile and grout followed by sealing. Due to the big size of the kitchen and the utility area I decided to break the work in four sections rather than tackling the whole area in one go.

To start I sprayed a strong dilution of Tile Doctor Remove & Go to the floor and allowed it to soak in for ten to fifteen minutes making sure that it didn’t dry out. I then cleaned the area with a 120-grit silicon carbide brush attached to a weighted rotary machine which loosened up the dirt and followed with a stiff brush along the grout lines to give them a good scrub. Remove and Go was chosen for this floor as the testing I did earlier revealed traces of an old sealer and this product is ideal for removing old coatings whilst cleaning.

I then rinsed the floor using my Airflex Pro machine which deploys water at high pressure washes and then vacuums the soiling away. These machines are quite expensive but are a good investment as they make light work of cleaning floors and are very popular with carpet cleaners. This was repeated for all areas and once I was satisfied that we had achieved a good clean throughout the kitchen and utility it was left to dry off fully overnight. Before leaving for the day, I set up four air movers to assist with drying out the floor.

Multi-Coloured Kitchen Slate Floor During Cleaning Wolverhampton

Sealing a Multi Coloured Slate Tiled Kitchen Floor

On returning the following day, the tiles were already looking so much cleaner that the day before. Before applying the sealer though the Slate needed to by dry so I tested the floor using the damp meter. If you try to apply the sealant before the floor is dry, it will not cure properly leading to a patchy appearance.

The readings were acceptable so I was able to move on to the final part of the renovation and apply a fresh sealer to the tiles. For this I selected Tile Doctor X-Tra Seal, this is a strong oil-based sealer, it does take a while for it to be absorbed especially on Slate as it’s not as porous as other types of tile. The new sealer will give the Slate a great durable stain resistant finish which should last for many years to come. It’s ideal for a kitchen which can experience lots of foot traffic and spillages. Only one coat of Tile Doctor X-Tra seal was applied and after a couple of hours it had dried out and could be walked on.

Multi-Coloured Kitchen Slate Floor After Cleaning Wolverhampton

To finish off I buffed the floor with the rotary machine fitted with a White pad which removed any excess sealed and gave the floor a very subtle sheen finish. My client was very happy with the results and for aftercare cleaning I left them with a bottle of Tile Doctor Neutral Tile Cleaner. This product is pH neutral and is mild enough to use daily without impacting the newly applied sealer which is the problem with the stronger products you find in supermarkets.

Professional Restoration of a Multi Coloured Slate Tiled Kitchen in Birmingham

Dull and Lifeless Multi-Coloured Slate Floor Renovated in Wolverhampton Read More »

Victorian Tiled Floor Restoration Smethwick

Full Victorian Hallway Floor Restoration for Property Developer in Smethwick

1 Comment / Smethwick Tile Cleaning, Victorian Tile Cleaning, Work by Category, Work by Location, Work History / Kieron Norton

A property developer contacted me earlier this year regarding a Victorian tiled hallway they had discovered at a property in Smethwick in the West Birmingham district of Sandwell. The property was being renovated into apartments and a fully restored tiled hallway would give the property the wow factor when entering the property.

Victorian Tiled Hallway Before Restoration Smethwick

I went over to the site to take a look and could immediately see the floor really was in a real mess. The tiles were covered in old flooring, adhesive, paint, screed, and plaster etc, I could see it was going to take some work to shift that lot. There was also an interior doorway that needed retiling. None the less these old Victorian floors are durable so none of that phased me and I was confident of a good result.

Restoring a Victorian Tiled Hallway Floor

I got the go-head from the developer and started work by tacking the loose tiles around one of the inner doorways. I seem to see a lot of this around door thresholds I can only assume its due some movement in the subfloor that can happen between different sections on a building.

With that section out of the way I started removing the screen from some of the more stubborn areas. For this I applied a strong dilution of Tile Doctor Grout Clean-up and after letting it soak in for fifteen minutes to soften the compound, I was able to scrape it away with some assistance from a steamer.

When this was completed, I covered the floor with a strong combination of Tile Doctor Pro-Clean and Remove & Go and left to dwell a good 20 minutes this time, topping it up every so often so it didn’t dry out. These products combine to make a powerful tile cleaner/coatings remover that would make quick work of cleaning up the floor. The cleaning cocktail was then scrubbed into the tile with a 200-grit diamond pad fitted to rotary machine. The slurry was then then removed using a wet extraction vacuum.

After reviewing the whole floor, I picked out those areas that needed more attention which were a few stubborn areas and the edges of the floor where the rotary machine can struggle to impact. I resolved those problems by hand with small diamond blocks which come in several coarse grits. Once I was finished tackling those, I took a step back to look at the floor and was really pleased with how the restoration was going, it was unrecognisable from when I had first come to view it.

Original Victorian floor were laid well before the invention of plastics and the damp proof membrane and in many cases are laid on top of compressed rubble. As a result, it’s important to allow moisture from the subfloor to be able to rise through the tile so it can evaporate at the surface. The previous coverings will have restricted this from happening and so I was concerned about the possibility of moisture and salts being trapped in the floor. Salts especially can be an issue as when they do make it to the surface, they can leave unsightly white deposits of the surface of the tile a process known as Efflorescence.

To counter this, I gave the whole floor an acid rinse with more Grout Clean-up worked in with a 400-grit diamond pad, this would neutralise the salts and give the tiles a further clean. It will also help neutralise the pH levels in the tiles after the use of the alkaline cleaning products earlier. To do this I applied and scrubbed it in with a 400-grit diamond pad to help with any issues. The floor was then rinsed with water and extracted as before to remove any trace of product.

Sealing a Victorian Hallway Tiles

The floor was left to dry for two days and on my return, I checked the floor for moisture with a damp meter to satisfy myself it was fully dry and ready to accept a sealer which was the last step in the restoration.

For this floor I chose to go with Tile Doctor Colour Grow which is a hard-wearing impregnating sealer that will cope with the foot traffic you would expect in a busy hallway. Colour Grow is also fully breathable so will cope well with any potential moisture rising through the tile and being a colour enhancer, it would help to make the beautiful colours in the Victorian tiles stand out.

Victorian Tiled Hallway After Restoration Smethwick

My customer was very happy with the result which was a total transformation and should do well to attract new tenants to the property when its finished. For aftercare I left the customer with a bottle of neutral tile cleaner to maintain the floor, its important to use a neutral pH product on sealed tiles as stronger products will reduce the life of the sealer.

Professional Restoration of a Victorian Tiled Hallway in Sandwell

Full Victorian Hallway Floor Restoration for Property Developer in Smethwick Read More »

Minton Hallway Floor Before and After Restoration Kings Heath

Full Restoration of a Minton Tiled Victorian Hallway Floor in Kings Heath

1 Comment / Bournville Tile Cleaning, Victorian Tile Cleaning, Work by Category, Work by Location, Work History / Kieron Norton

Details below of the full restoration of a Victorian Minton tiled hallway floor that I restored earlier this year in the South Birmingham suburb of Kings Heath. The owner had recently purchased the property and discovered a Victorian tiled floor underneath an old carpet in the hallway.

Victorian Tiled Hallway Before Restoration Kings Heath

The floor was in a very poor state with areas where tiles were missing and had been backfilled with a cement levelling compound. The adjacent vestibule also had a large area of tiling missing. My client was delighted when they had found some of the missing original tiles and now wanted to investigate having the floor returned to its former glory.

I went along to quote and give a demonstration of the restoration process and provide an indication of the expected results. The test area responded well to the treatment and they were happy with my quote to repair and renovate the floor, so were booked in to restore the whole floor and I set about sourcing matching replacement tiles.

Repairing a Victorian Tiled Hallway Floor

The first two days were spent carefully removing the leveller, cleaning up the exposed subfloor then cutting and fitting replacement tiles. One of the areas that needed extra work was a doorway which required a sub-floor installing before being able to tile with a matching pattern.

Victorian Tiled Hallway During Restoration Kings Heath

With the main hallway tiling completed I started on the tiling in the adjacent vestibule. I had been given a couple of bags of original tiles to sort out by the owner and fortunately most of them were in good condition, so I was able to repair the vestibule with approximately 90% original tiles. The rest were made up of reproduction tiles that I had managed to source. Additionally, the floor had numerous loose tiles which needed resetting and finishing with replacements. Due to so many of the tiles being original the appearance between the newly replaced area did not look too much different however I was confident the following deep clean and seal would blend them in well.

Deep Cleaning a Victorian Tiled Hallway Floor

With the tiling now repaired my next focus was the cleaning which I started on day three with an application of neat Tile Doctor Pro-Clean to help loosen the carpet adhesive and paint splashes that were staining the floor.

The Pro-Clean was mopped onto the floor and then worked in with a 200-grit diamond pad fitted to a weighted rotary buffing machine. The extra weight, cleaning agent and coarse pad gets into the pores of the tile releasing years of ingrained dirt and removing old sealers and coatings. The floor was then rinsed with water and the waste extracted with a wet vacuum.

The next step was to give the floor an acid rinse using another Tile Doctor product called Grout Clean-up which is designed to remove grout smears and mineral salts that will have been trapped into the pores of the tile after years of being covered in carpet. The grout clean-up was worked into the tiles using a 400-grit burnishing pad to refine the tile surface and close up the pores. The floor was rinsed and extracted again and left to dry out for two nights.

Sealing a Victorian Tiled Hallway Floor

I returned a few days later and after testing the floor was dry set about applying a sealer. For this floor I chose to apply six coats of Tile Doctor Seal and Go which gives a lovely sheen finish and really brought out the character in the beautiful tiles. It’s also water based so it doesn’t leave a smell as it dries.

Victorian Tiled Hallway After Restoration Kings Heath

By the time I had finished the floor was looking transformed and the client was delighted, so much so they left this fantastic review:

Kieron was fantastic. He brought our Minton flooring back to life and kept us informed every step of the way. He really knew what he was talking about and has done a fantastic job. Not to mention he was a really really lovely guy and great value for the incredible workmanship he offers.”

I left the customer with a bottle of Tile Doctor Neutral Tile Cleaner to help maintain the tiles appearance. It is important to use a neutral pH cleaner when maintaining sealed floors as stronger tile cleaning products that you find in supermarkets are too strong and will prematurely strip the protective sealer off a floor.

Professional Restoration of a Victorian Tiled Hallway in West Midlands

Full Restoration of a Minton Tiled Victorian Hallway Floor in Kings Heath Read More »

Victorian Tiled Floor Before After Restoration Bourneville

Victorian Period Hallway Floor Restored in Bourneville

1 Comment / Bournville Tile Cleaning, Victorian Tile Cleaning, Work History / Kieron Norton

This client had recently discovered a Victorian tiled floor hidden underneath hallway carpet at their property in the Birmingham suburb of Bournville. It didn’t look in great condition as some areas were missing and staining from carpet adhesive, but it was a beautiful patterned floor tiled potentially with Minton tiles and they were really keen to find out if it could be restored to its’ former glory.

The rest of the property in Bourneville had retained its’ original features so the floor would be the icing on the cake.

Victorian Tiled Floor Before Restoration Bourneville

I went along to survey the floor, provide a quote and perform a small cleaning demonstration so I they could get an idea of the results they could expect. The damaged areas were repairable and once I had completed the test clean, we were confident the floor could be restored. They were happy to proceed with my quote and the job was booked in.

Bourneville is the home of the chocolate makers Cadbury, so many people will have visited and been aware of the area. Many of the houses were built for the workers at the Cadbury factory.

Repairing a Victorian Tiled Hallway Floor

On the first day I started on relaying the three internal door thresholds with some existing tiles and matching replacements that I had managed to source online. We are usually able to source reclaimed tiles and reproduction ones, so repairs are not usually a problem. It took some time to clean out the old adhesive, cut the replacement tiles to size where required and then then fix in place with fresh adhesive.

Victorian Tiled Door Threshold Before Restoration Bourneville

The next job was to replace some broken ones along the edges and some in the main part of the floor which had been drilled in to. These can be tricky to do as they can easily break adjoining tiles. When this was done the tiles were grouted and the other loose ones reset. It’s meticulous work and the tile adhesive needs time to set before the next stage which would be giving the entire floor a deep clean.

Deep Cleaning a Victorian Tiled Hallway Floor

The following day I focused on deep cleaning the tiles starting with the removal of the strong adhesive that had secured the carpet gripper. This had to be removed by applying a neat Tile Doctor Pro-Clean and leaving it to dwell for ten minutes. The Pro-Clean helped loosen the glue which was then carefully scraped off.

The floor was then mopped with a strong dilution of Pro-Clean before running over the tiles with a 200-grit diamond pad fitted to a rotary machine. This combination gets into the pores of the tile, releasing the dirt and renovating the surface. The resultant slurry was then rinsed off with water and extracted using a wet vacuum.

Next, the floor was given an acid rinse using Tile Doctor Grout Clean-Up worked in with a 400-grit burnishing pad to further clean up the tiles and close-up the pores. The floor was rinsed and extracted again and allowed to dry for two nights.

Sealing a Victorian Tiled Hallway Floor

On my return I tested the floor was dry with the damp meter and satisfied myself that the floor was dry and ready to accept a sealer which would enhance its appearance and protect it going forward.

My sealer of choice was Tile Doctor Seal and Go Extra which adds a nice subtle sheen to the floor and being breathable will cope with any potential moisture rising through the tiles. This is an important consideration on old floors like this where no damp proof membrane will have been fitted.

Victorian Tiled Floor After Restoration Bourneville

By the time I had finished the floor was transformed and had become the main focal point of the house. My clients were very pleased with the new entrance to their home and before leaving we discussed after care for which I left them with a complementary bottle of Neutral Tile Cleaner.

Victorian Tiled Door Threshold After Restoration Bourneville

Professional Restoration of a Victorian Tiled Hallway in Birmingham

Victorian Period Hallway Floor Restored in Bourneville Read More »